Call Us: +91-44-331133
Sheenlac 3077 – Enamel Semi Glossy
SHEENLAC 3077is a single pack semi-gloss finish with excellent film integrity and built-in toughness.
AREA OF USAGE
SHEENLAC 3077 is ideal for interior painting. It is also ideal for a new surface, painted wood and metal substrates.
Shelf Life
24 months from the date of manufacturing. The mentioned shelf life is applicable only in original tightly closed containers stored away from direct sunlight and excessive heat.
Storage and Transportation
Do not store or transport the containers in direct sunlight or at elevated temperatures. Store the container in an upright position to avoid any leakage or damage.
Coverage
Theoretical Coverage – 9.6 ㎡/liter at 50 ㎛ and specified volume solid
Practical Coverage – Allow appropriate loss factors
Technical Data
Color
White & Colors
Gloss /Sheen
Semi Glossy
Solid by Volume
48 ± 3%
Dry Film Thickness
50 -75 ㎛
Method of Application
Air assisted Spray, Brush
VOC
< 410 gm/ litre
Stability of thinned paint
Use within 24 hours
No. of coats Specified
1‐2 coats
Drying Times
| (·H: Hour, D: Day) | 15℃ | 25℃ | 40℃ |
| Set to Touch | 6 Hrs | 4 Hrs | 2 Hrs |
| Dry Hard | Next Day | 18 Hrs | 10 Hrs |
| Overcoating Interval with recommended topcoats Min | Next Day | 18 Hrs | 10 Hrs |
| Overcoating Interval with recommended topcoats Max | Extended* | Extended* | Extended* |
*Ensure sanding with 220 emery before over-coating
Applications
Overcoat Preparation
- Stir the paint properly before using
- Use recommended thinners only
- Do not over thin the paint more than the recommended levels
Surface Preparation
- Ensure removal of all dirt, grease, and loosely bonded or flaking materials from the primed surface
- Apply recommended primer system. Do this before coating the surface with SHEENLAC 3077
- Remove all contaminations before applying the above primer.
- Prepare surface as per Sa2.5 (ISO 8501-1:2007) or SSPC-SP6 for maintenance and repair jobs
Overcoat Preparation Details
| Airless Spray | – | Tip Range 0.013″~0.018″ |
| Air Spray (Conventional) | – | Use suitable proprietary equipment |
| Brush | – | Typically 30-40 microns can be achieved |
| Thinner | – | Sheenlac 30T Thinner |
| Dilution Ratio (by volume) | ||
| Brush | – | 10-20% Max |
| Airless spray | – | As appropriate and lesser than 10 % |
| Air assisted spray | – | 15-20% Max |
Application Procedure
- Apply SHEENLAC 3077within the over-coating intervals specified in the datasheet of the primer
- Allow it dry as per time interval mentioned above
Application Precautions
- Do not apply if material, substrate or ambient temperature is less than 10°C or above 45°C
- Apply on when the substrate is at least 3°C above the dew point
- Do not apply when the humidity is above 85%RH
- Ensure proper surface preparation when exceeding over-coating interval or exposed to sunlight for a long time. This ensures proper inter-coat adhesion
Safety Features
- Refer the MSDS of the product which is available on request
- Keep out of reach of children
- Use personal protective equipment like goggles, face masks, gloves
- Immediately rinse or wash appropriately using plenty of water in case of contact with eyes or skin
- Seek medical advice if any sort of irritation persists
- Do not inhale the vapour or spray
- Seek immediate medical attention in case of ingestion
- Use SHEENLAC 3077 only in industrial environments by qualified applicators
Ancillary Products
EXTERIOR PENETRATIVE
WOOD STAIN
OPULENCE EXTERIOR SEALER
PU THINNER D-67
