Sheenlac 3276 – PU Alkyd Glossy Finish

SHEENLAC 3276 is a single-pack system based on a unique blend of polyurethane alkyds. It is recommended for use in places where better durability and gloss is required compared to conventional enamels.


Properly primed metal surfaces as a glossy topcoat in medium corrosive environments. Recommended over primers like Sheenlac 3000 or Sheenlac zinc chromate primers.

Shelf Life

24 months from the date of manufacturing. The mentioned shelf life is applicable only in original tightly closed containers stored away from direct sunlight and excessive heat.

1L paint
4L paint
20L paint


Download Product Brochure


Storage and Transportation


Do not store or transport the containers in direct sunlight or at elevated temperatures. Store the container in an upright position to avoid any leakage or damage.



Theoretical Coverage – 9.4 ㎡/liter at 50 ㎛ and specified volume solid

Practical Coverage – Allow appropriate loss factors

Technical Data


more-colorsWhite & Colors

Gloss /Sheen


Solid by Volume

chain47 ± 2%

Dry Film Thickness

overcoat-interval50 -75 ㎛

Method of Application

overcoat-intervalAir assisted Spray, Air Spray, Brush


drying-time< 410 gm/ litre

Stability of thinned paint

tack-freeUse within 24 hours

Drying Times
(·H: Hour, D: Day) 15℃ 25℃ 40℃
Set to Touch 5 Hrs 3 Hrs 2 Hrs
Dry Hard Next Day 12 Hrs 7 Hrs
Overcoating Interval with recommended topcoats Min Next Day 12 Hrs 7 Hrs
Overcoating Interval with recommended topcoats Max Extended* Extended* Extended*

Overcoat Preparation

  • Stir the paint properly before using
  • Use recommended thinners only
  • Do not over thin the paint more than the recommended levels

Surface Preparation

  • Ensure removal of all dirt, grease, and loosely bonded or flaking materials from the surface
  • Ensure the primer surface is free of all contaminations
  • Prepare metal surfaces to the level of Sa2.5 for maintenance and repair jobs
  • Use power tool cleaning depending on the primer selected for maintenance and repair jobs

Overcoat Preparation Details

Airless Spray Tip Range 0.013″~0.018″
Air Spray (Conventional) Use suitable proprietary equipment
Brush Typically 30-40 microns can be achieved
Thinner Sheenlac 31T Thinner
Dilution Ratio (by volume)
Brush 10-20% Max
Airless spray As appropriate and lesser than 10 %
Air assisted spray 15-20% Max

Application Procedure

  • Apply SHEENLAC 3276over the recommended primer system
  • Apply SHEENLAC 3276within the over-coating intervals specified in the datasheet of the primer
  • Allow it dry as per time interval mentioned above

Application Precautions

  • Do not apply over damp substrates or steel below the due point
  • Do not apply when the humidity is above 85%RH
  • Ensure proper surface preparation when exceeding overcoating interval or exposed to sunlight for a long time. This ensures proper inter-coat adhesion
Safety Features
  • Refer the MSDS of the product which is available on request
  • Keep out of reach of children
  • Use personal protective equipment like goggles, face masks, gloves
  • Immediately rinse or wash appropriately using plenty of water in case of contact with eyes or skin
  • Seek medical advice if any sort of irritation persists
  • Do not inhale the vapour or spray
  • Seek immediate medical attention in case of ingestion
  • Use SHEENLAC 3276 only in industrial environments by qualified applicators

Flag Counter