Description

Available packs:

Technical Data:

*Recoat and drying period may vary under different conditions
 

Coverage

Sq ft / L / Coat
*Performance may vary due to factors such as method of application, surface roughness and porosity.
 

Tinters type:

1. Bodyian basecoat: B series tinters
2. Bodyian top coat: BU series tinters
 

Application procedure:

1. Apply BP-5000 2 K primer grey / BP-2400 1 K primer grey if it is applied directly on metal. Apply MP-300 plastic primer if it is applied on plastics
2. Apply suitable putty wherever required to fill the undulation / dent to make the surface flat and apply BP-2400 1 K primer grey / BP-5000 2 K primer grey
3. Apply Bodyian base coat colour and provide flash off time of 10 – 15 mins
4. Apply BC-3100 clear coat matt / BC-9300 clear coat as per suggested ratio
 

Safety Precautions

1. Always keep paint out of reach of children.
2. Ensure good ventilation during application and drying.
3. If accidental contact with skin should occur, wash immediately with soap and water.
4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
6. Do not smoke while painting.
7. Flammable. Store in a cool dry place away from heat and sparks.
8. Refer to Material Safety Data Sheet for complete information.

Storage and Transportation: 

Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage

Shelf Life:
24 months from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.