Description

Available packs:

                        

Technical Data:

*Recoat and drying period may vary under different conditions
 

Coverage

10-11 m²/ℓ per coat at 30 µm DFT
*Actual coverage may vary based on the type of wood used and the application methodology.
 

Application

 
Melamine Basecoat Sealer

Sand lightly between coats with 320 emery paper to denim. Dust off with dry cloth. This removes upstanding wood fiber ends and dust particles which could draw moisture in behind the film and shorten the life of the coating.

Melamine Topcoat Glossy

HVLP GUNS – 1.2 mm – 1.4mm tip 8-10 psi (output) CONVENTIONAL GUNS – 1.2mm – 1.6mm tip 40-50 psi

Product benefits:

Quick drying and good stackable Nature: These properties make Sheenlac’s Melmyn Gold Finish a preferred choice for high productivity area.

High gloss retention: Due to its superior surface build, the gloss levels do not sink, fade and dull out. This retention of gloss showcases the furniture as a new one for longer periods

Non-yellowing: The special polyester formulation in the Melmyn Gold finish resists yellowing for a longer duration

Durability with smooth finishing: The film produced by the Melmyn finish is hard and hence can withstand rough work on its surfaces

Resistance to water and household chemical: It is an excellent choice for commercial and household furniture due to the water-resistant property of the finish

A self-sealing product: Melmyn Gold Finish has been formulated as a self-sealing product and therefore no separate sealer is required
 

Application procedure:

BARE WOOD: Provide two coats of Sheenlac MELMYN Gold sealer. Follow it with one coat of Sheenlac MELMYN Gold Gloss or Matt Finish.

PREVIOUSLY VARNISHED WOOD (IN GOOD CONDITION): Provide a coating of Sheenlac MELMYN Gold sealer followed by a coat of Sheenlac MELMYN Gold Gloss or Matt Finish.
 

Safety Precautions

1. Always keep paint out of reach of children.
2. Ensure good ventilation during application and drying.
3. If accidental contact with skin should occur, wash immediately with soap and water.
4. Take care to avoid contact with the eyes. In case of contact, immediately rinse the eyes with plenty of water and seek medical attention.
5. Harmful if swallowed. Seek medical attention and do not induce vomiting.
6. Do not smoke while painting.
7. Flammable. Store in a cool dry place away from heat and sparks.
8. Refer to Material Safety Data Sheet for complete information.
 

Storage and Transportation: 

Do not store or transport the containers under direct sunlight or at elevated temperatures. Store the container in an upright position in order to avoid any leakage or damage

Shelf Life:
2 Years from the date of manufacturing in original tightly closed containers stored away from direct sunlight and excessive heat.