NC Sanding Sealer

Lacquer Sanding Sealer is a nitrocellulose-based single pack clear wood sealer for any interior wood to seal the surface. This ensures adhesion of the topcoat to the substrate, resists moisture and eliminates seepage of finishes into the substrate providing an excellent base for Sheenlac nitrocellulose-based topcoats or Wood polish.

AREA OF USAGE

Used as a quick-drying sanding sealer for furniture, toys, shop fittings, doors, cabinets, desks, wall panelling, partitions and most interior woodwork. They are not preferred for exposed exterior wood finishes.

  • fast-dryFast dry and excellent filling properties mean that the number of topcoats can be kept to a minimum.
  • easy-sandingEase of sanding – Effortless manual sanding
  • excellent-glossSmooth silky feel – Sound and smooth surface appeared after sanding.
  • easy-repairSeals any wood surface – works well on all wooden surface.

Packs Available

Shelf life is 18 months and should be stored between 15-30 degree Celsius

200ML Paint
500ML paint
1L paint
4L paint
20L paint

 

download
Download Product Brochure

 

Available Finish

matt-wood

Coverage

Coverage

70-80 Sqft/L/Coat

**coverage may vary based on the type of wood used and the application methodology

Technical Data

drying-timeDrying Time
@30 c and 60% RH

Surface Dry

Surface-dry2 – 3 minutes

Tack Free

tack-free10 minutes

Overcoat Interval

overcoat-interval1 Hour

drying-timeFlash Point
Above at 12⁰ C
RECOMMENDED USE
New wood

First properly cure and finely sand with 280-320 grit sandpaper. Then proceed to remove the sanding debris from the surface.

Refinishing

If the surface is in good condition, remove all polish or wax. Sand to a matte finish and remove all sanding debris thoroughly. Test spray to check compatibility of sealer with old finish and for the presence of silicone (fish eye).

Ancillary Products
opulence-exteriorNC WOOD FILLER
opulence-exteriorINTERIOR WOOD STAINER
opulence-exteriorNC THINNER D-13 X

Flag Counter

0