Sheenlac 2076 – 2K Epoxy High Solid Zinc Phosphate

Sheenlac 2076 -2K Epoxy High Solid Zinc Phosphate is a two pack epoxy topcoat finish with high gloss. The product displays abrasion resistance and good chemical resistance to alkalis, acids and solvents.

RECOMMENDED USE

Sheenlac 2076-2K Epoxy High Solid Zinc Phosphate is ideal as a topcoat over recommended primers. The product is used in general, industrial and a wide variety of onshore and offshore applications.

Shelf Life

24 months for Sheenlac 2076 Part A and Part B from the date of manufacture.
The mentioned shelf life is applicable only when it is stored away from direct sunlight and excessive heat, in original tightly closed containers.

1L paint
4L paint
20L paint

Storage and Transportation

Coverage

Do not store or transport the containers under direct sunlight or at elevated temperatures.
Store the containers in upright position to avoid leakage or damage.

Coverage

Coverage

Theoretical Coverage: 10.5 ㎡/liter at 50 ㎛ and specified volume solid

Practical Coverage: Allow appropriate loss factors

Technical Data

Color

more-colorsWhite & Colors

Texture

superior-glossGlossy

Solid by Volume

chain52 ± 3%

Dry Film Thickness

overcoat-interval50 -75 ㎛

Method of Application

overcoat-intervalAirless Spray, Air Spray,
Brush

VOC

drying-time< 410 gm/ litre

Drying Times
(·H: Hour, D: Day) 15℃ 25℃ 40℃
Set to Touch 3 Hrs 1½ Hrs 1 Hrs
Dry Hard 10 Hrs 5 Hrs 4 Hrs
Overcoating Interval with recommended topcoats Min 10 Hrs 5 Hrs 4 Hrs
Overcoating Interval with recommended topcoats Max Extended* Extended* Extended*

*Ensure sanding with 220 emery before over-coating

Applications

Overcoat Preparation

  • Stir and mix the paint and hardener thoroughly before use.
  • Follow accurate mixing ratios.
  • Use recommended thinners only.
  • Do not over thin the paint more than the recommended levels.

Surface Preparation

  • Ensure that the primed surface to be coated with Sheenlac 2076 is free from all contaminations.
  • Ensure removal of dirt, grease, loosely bound or flaking materials from the primed surface.
  • For maintenance and repair jobs, the surface should be prepared as per Sa2.5 (ISO 8501-1:2007) guidelines or using power tool cleaning depending on the primer that is selected.

Overcoat Preparation Details

Mix Ratio – 4 part(s):1 part by volume
Airless Spray – Tip Range 0.013″~0.018″
Air Spray (Conventional) – Use suitable proprietary equipment
Brush – Typically 30-40 microns can be achieved
Thinner – Sheenlac 20T Thinner
Dilution Ratio (by volume)
Brush – 15% Max
Airless spray – As appropriate and lesser than 10 %
Air assisted spray – 10-15% Max
(.H:Hour) 15℃ 25℃ 40℃
Pot Life 6H 5H 3H

Application Method

  • Apply Sheenlac 2076 within the over coating intervals specified in the datasheet of the primer.

Application Precautions

  • Do not apply this product over damp substrates or steel below the dew point.
  • Do not apply when the humidity is above 85% RH.
  • Do not use mixed paint after the pot-life period.
  • If the over coating interval or sunlight exposure is longer, ensure proper preparation of the surface, before over coating.
SAFETY PRECAUTIONS
  • Refer MSDS of the product, available on request.
  • Keep out of reach of children.
  • Use personal protective equipment like goggles, face masks and gloves.
  • In case of contact with eyes or skin, wash immediately using plenty of water. Seek medical advice, if irritation persists.
  • In case of ingestion, seek immediate medical attention.
  • Do not inhale the vapour or spray.
  • Sheenlac 2076 is intended to be used only in industrial environments by qualified applicators.

Flag Counter

0