Sheenlac 3176 – QD Primer cum Topcoat – DTM

Sheenlac 3176 QD Primer cum Topcoat- DTM is a single pack, fast air-drying alkyd enamel. Designed as a general purpose direct-to-metal coating, the product is exclusively meant for places where speed drying is required.

RECOMMENDED USE

Sheenlac 3176 QD Primer cum Topcoat- DTM is ideal for properly prepared metal surfaces in light industrial environments. Used primarily as an air-dry enamel.

Shelf Life

24 months from the date of manufacture.
The mentioned shelf life is applicable only when it is stored away from direct sunlight and excessive heat, in original tightly closed containers.

1L paint
4L paint
20L paint

Storage and Transportation

Coverage

Do not store or transport the containers under direct sunlight or at elevated temperatures.
Store the containers in upright position to avoid leakage or damage.

Coverage

Coverage

Theoretical Coverage: 8.5 ㎡/liter at 50 ㎛ and specified volume solid

Practical Coverage: Allow appropriate loss factors

Technical Data

Color

more-colorsWhite & Colors

Gloss /Sheen

superior-glossSemi Glossy

Solid by Volume

chain42 ± 2%

Dry Film Thickness

overcoat-interval50 -75 ㎛

Method of Application

overcoat-intervalAir assisted Spray, Air Spray, Brush

VOC

drying-time< 490 gm/ litre

Stability of thinned paint

tack-freeUse within 24 hours

No. of coats Specified

pore-formation1‐2 coats

Drying Times
(·H: Hour, D: Day) 15℃ 25℃ 40℃
Set to Touch 20 Mins 15 Mins 10 Mins
Dry Hard 60 Mins 50 Mins 40 Mins
Overcoating Interval with recommended topcoats Min 10 Mins 5 Mins 5 Mins
Overcoating Interval with recommended topcoats Max 15 Mins 10 Mins 10 Mins
Applications

Overcoat Preparation

  • Stir the paint thoroughly before using
  • Use recommended thinners only
  • Do not over thin the paint more than the recommended levels

Surface Preparation

  • Ensure the surface is free from all contaminations, before applying the primer.
  • Ensure removal of dirt, grease, loosely bound or flaking materials from the surface.
  • Blast clean the surfaces complying with minimum Sa2.5 (ISO 8501-1:2007) or SSPC-SP6.
  • Prepare metal surfaces as per Sa2.5 for maintenance and repair jobs.

Overcoat Preparation Details

Airless Spray – Tip Range 0.013″~0.018″
Air Spray (Conventional) – Use suitable proprietary equipment
Brush – Typically 30-40 microns can be achieved
Thinner – Sheenlac 31T Thinner
Dilution Ratio (by volume)
Brush – 10-20% Max
Airless spray – As appropriate and lesser than 10 %
Air assisted spray – 15-20% Max

Application Method

  • Apply a coat of Sheenlac 3176 over the recommended primer.
  • Apply a coat of Sheenlac 3176 within the over coating intervals specified in the datasheet of the primer.
  • Allow it to dry as per the time interval mentioned above.

Application Precautions

  • Do not apply this product over damp substrates or steel below the dew point.
  • Do not apply when the humidity is above 85% RH./li>
  • If the over coating interval or sunlight exposure is longer, ensure proper preparation of the surface, before over coating. This ensures proper inter-coat adhesion.
SAFETY PRECAUTIONS
  • Refer MSDS of the product, available on request.
  • Keep out of reach of children.
  • Use personal protective equipment like goggles, face masks and gloves.
  • In case of contact with eyes or skin, wash immediately using plenty of water. Seek medical advice, if irritation persists.
  • In case of ingestion, seek immediate medical attention.
  • Do not inhale the vapour or spray.
  • Sheenlac 3176 is intended to be used only in industrial environments by qualified applicators.

Flag Counter

0