Make your wood shine! Get that coveted sparkling beauty with gorgeous glossy or matt finish by using Sheenlac’s Melmyn interior finish on wooden surfaces.


Melmyn works wonder on high-end kitchen cabinetry, bathroom vanities, table tops, dining room furniture, bedroom furniture, millwork, office furniture and store fixtures.

  • quickdry-with-high-productivityQuick drying and good stackability makes it a better choice for high productivity area.
  • high glossGood yellowing resistance with high gloss retention – Due to its superior surface build, the gloss levels are maintined for long.
  • durable-for-yearsExcellent durability with smooth finishing – Film is hard and flexible and withstands to many abuses.
  • water-resistanceExcellent resistance to water and household chemical – Ideal choice for commercial and houshold furnitures.
  • chemical-freeMelmyn has been formulated as a self-sealing product – No separate sealer is required.
  • value-moneyExcellent pot life properties make for easy application and reduce wastage costs from product going off.

Product Information

Packsize Available

1L paint 4L paint 20L paint

Types of Finish



80-100 Sqft/L/Coat

**coverage may vary based on the type of wood used and the application methodology

Technical Data

drying-timeDrying Time
@30 c and 60% RH

Surface Dry

Surface-dry10 – 15 minutes

Tack Free

1 Hour

Overcoat Interval

overcoat-interval4 -6 Hours

superior-glossGloss level @ 60


Application Environment Surface Temp Ambient Temp Relative Humidity
Min 10 °C 15  °C 20%
Max 35 °C 45 °C 85%
Melamine Basecoat Sealer

Application Method-Basecoat Sealer Thinner No.of coats Re-coating Time Sanding*
Brush / Conventional spray 25-30% NC Thinner D-13X / D-18 2 4 Hours 320 – 400

Sand lightly between coats with 320 emery paper to denim. Dust off with dry cloth. This removes upstanding wood fiber ends and dust particles which could draw moisture in behind the film and shorten the life of the coating.

Melamine Topcoat Glossy

Application Method-Topcoat Glossy / Matt Thinner No.of coats Re-coating Time Sanding
Conventional, Airless, Air Assisted Airless, HVLP 25-30% NC Thinner SP58 2 4 Hours 400

HVLP GUNS – 1.2 mm – 1.4mm tip 8-10 psi (output) CONVENTIONAL GUNS – 1.2mm – 1.6mm tip 40-50 psi

Application Tips
Bare Wood

MELMYN Interior Wood finish – Apply three coats for the best appearance and durability.

Previously Varnished Wood (in good condition)

MELMYN Interior Wood finish– Apply one or two coats, depending on the initial surface condition.

Flag Counter