Opulence Exterior PU

Opulence Exterior PU, an acrylic based 2 pack polyurethane clear wood coating, is specially formulated for premium wood works. It ensures excellent weather resistance, light fastness and UV protection, thereby preserving the natural beauty of your wooden exteriors for years to come.

AREA OF USAGE

Ideal for use on Exterior doors, windows, trim, bathroom cabinets, bar tops, kitchen countertops, outdoor furniture.

  • EXTERIOR DURABILITY – The high build 2 pack PU chemistry ensures excellent exterior durability even in adverse climatic conditions. Forming a hard exterior coating, it provides both protection and aesthetic appeal to natural wood.
  • FILM FLEXIBILITY – The superior Polyurethane chemistry provides excellent flexibility to the film that prevents any peel off even on curved surfaces. The film’s flexibility can be measured
    from the fact that there is no film cracking even if the underlying wooden furniture expands up to 1mm in thickness*(under test conditions).
  • RESISTANCE – Special additives used in the product impart the film with resistance to UV, Heat, Water and other adverse elements.

Product Infromation

Available Packs

1L paint 4L paint 20L paint

Types of Finish

Coverage

Coverage

80-100 Sq ft/L/Coat

**coverage may vary based on the type of wood used and the application methodology

Technical Data

drying-timeDrying Time
@30 c and 60% RH

Surface Dry

Surface-dry10 – 15 minutes

Tack Free

tack-free3 Hours

Overcoat Interval

overcoat-interval8 -12 Hours

superior-glossGloss level @ 60
Gloss
gloss
Matt
matt

Application

Opulence Basecoat Sealer

Application Method-Basecoat Sealer Thinner No.of coats Re-coating Time Sanding*
Conventional, Airless,
Air Assisted Airless, HVLP
20-30% PU Thinner D-63 2 8-12 Hours (not exceed 72 hrs) 320 / 400

Sand between the coats with 320 emery paper to denib the wood hair. Dust off with dry cloth. This removes upstanding wood fiber ends and dust particles which could draw moisture in behind the film and shorten the life of the coating.

Opulence Topcoat

Application Method-Topcoat Glossy / Matt Thinner No.of coats Re-coating Time Sanding
Conventional, Airless, Air Assisted Airless, HVLP 20-30% NC Thinner D-63 1 – 2 coats 8-12 Hours (not exceed 72 hrs) 400 / 600

HVLP GUNS – 1.2 mm – 1.4mm tip 8-10 psi (output) CONVENTIONAL GUNS – 1.2mm – 1.6mm tip 40-50 psi

FILLER: If required use Sheenlac NC or WB Timber filler. Remove the excess using 220 grit Emery paper and wipe-out the dust with dry cloth.

Application Tips
HOW TO PREPARE (THE WOODEN SURFACE)

Ensure that wooden surfaces are clean, firm and dry. Remove any oil, grease, mortar droppings, etc.

NEW WOOD

Sand in the direction of the wood grain till its smooth with 150 grit followed by 220 grit emery paper. Remove dust using a damp cloth.

PREVIOUSLY VARNISHED WOOD IN GOOD CONDITION

Using 150 grit emery paper sand the surface to make it smooth. Remove sanding dust using vacuum or cloth dampened with mineral spirits.

PREVIOUSLY VARNISHED WOOD IN POOR CONDITION

Scrape the damaged layer completely by sanding it deeply with emery paper or using Sheenlac Paint Remover. Rinse thoroughly with clean water. Sand the surface deeply till there’s no residue left. Remove dust with a damp cloth.

Flag Counter

0