Excessive Spray

Excessive Spray – Fog/Dry

When the spray gun ejects excessive paint not as per recommended guidelines, defects appear. They are a direct consequence of Excessive Spray.

Possible Causes

Solutions

Using Wrong Solvent blend Choose a slow evaporating thinner.
Atomizing Air Pressure too High Use necessary amount of compressed air only.
Over Reduction of Material • Use less reduction.
• Add fresh material to over reduced material.
Holding the Gun too Far from the surface. Hold the spray gun at a distance of 6-10 inches as recommended.
Spraying Past the Surface of the product Release trigger as the gun passes the target.
Wrong Air Cap or Fluid Tip Use proper combination as recommended by the manufacturer’s guide.

Flag Counter

0