Spots

Possible Causes	Solutions
Seeping of oil through the ‘separator’ of the spray line causing brown spots.	• Maintain Cleanliness. • Bleed the line once every 8 hours.
Mixing of Water with Lacquer either through the ‘separator’ or when the Surface is Not Dry, it can cause spots to appear.	• Clean airline and ‘separator’. • Ensure surface to be finished is completely dry. • Bleed the line once every 8 hours.
Flattening Paste not Mixed thoroughly causing white spots to appear.	Stir completely and strain, if required
Drying turns Spotty owing to Unclean surface. Surface having wax, silicone or grease.	Clean wooden surface carefully with volatile solvent prior to coating.

Possible Causes