by kamalakkannan | Jul 5, 2018
Dirt or Seediness Dust and dirt particles settle on the surface, during the application of the paint, the condition is called Dirt or Seediness. Possible Causes Solutions Unclean conditions in the surrounding area. Ensure that the painting area is clean. Dust in the...
by kamalakkannan | Jul 5, 2018
Excessive Material Usage When the spray gun is not held as per the recommended guidelines, defects begin to appear. These defects are a direct result of Excessive Material Usage Possible Causes Solutions Failing to Trigger the gun at each stroke • Release the trigger...
by kamalakkannan | Jul 5, 2018
Excessive Spray – Fog/Dry When the spray gun ejects excessive paint not as per recommended guidelines, defects appear. They are a direct consequence of Excessive Spray. Possible Causes Solutions Using Wrong Solvent blend Choose a slow evaporating thinner. Atomizing...
by kamalakkannan | Jul 5, 2018
Orange Peel When the coated surface develops a kind of finish that resembles an orange peel, the defect is termed Orange Peel. The coating is not smooth but exhibits the texture of an orange. Possible Causes Solutions Improper Thinning of paint • Choose solvents that...
by kamalakkannan | Jul 5, 2018
Sagging When the paint gives a downward drooping appearance, the condition is referred to as Sagging. This results when a heavier coat of paint is sprayed on a vertical, or a near vertical surface than the viscosity of the finish. Possible Causes Solutions Slow Over-...