Product benefits

Ease of application: Product can be applied using padding.

High penetration power: It penetrates the pores of the wood easily, enhancing the natural beauty of wood grains.

Performance: The product has best in moisture resistance and maintains sheen for a longer duration when compared to local French polish.

SKU: N/A Category:

Application method

Fresh wood: On bare wood sand with grain using #120 grit and finish with #220 grit emery paper. Wood must be clean, dry and free of grease, oil, dirt, and any contamination. Fill dents, pores with Sheenlac water base Paste wood filler to create a smooth, closed grain surface. To get the desired colour use Solvent or Water base wood stains and allow to dry 2 hours. Sand mildly using #320 grit.

  1. Dilute WB Wood Polish with 40 – 50% potable water for ragging or brush application. Use 30% water for spray application. Do not mix stains with the topcoat polish. Do not apply thick coat
  2. Touch dry in 20 minutes and re-coat after 1 to 2 hours, Lower temperatures will prolong dry time from 3 to 4 hours.
  3. Apply minimum 3 coats. Additional coats can be applied for desired finish.

Previously varnished wood: Sand to obtain a smooth surface using #150 grit and finish with #320 grit emery paper. Remove dust using cloth dampened with mineral spirits. Use WB Paste for any repair work and follow application procedure for fresh wood as mentioned.


There are no reviews yet.

Be the first to review “WATER BASED WOOD POLISH”

Your email address will not be published. Required fields are marked *

Flag Counter