Direction of Use::
Make deep cuts on the old paint surface using a sharp edge knife / putty blade. Shake the content well before use. No dilution is required. Apply the paint remover by brush as a thin layer and allow it to react for 10-15 mins. Use a putty knife to remove the lifted area and use mild force to remove the loose paint. Repeat the procedure till you get to the bare substrate. After thorough removal of paint, use plenty of water and soap to rinse off and clean. If used on wood, wipe-off with cloth, soaked in Sheenlac Enamel/ N.0 Thinner D-13x.