Description

Technical Data:

*Recoat and drying period may vary under different conditions
 

Coverage

How to prepare? (surface / wall)

1. Ensure that the surface is free from dust, dirt, chalking, oil, grease, loosely bound particles or any other contamination.
2. Ensure removal of Algae and Fungal growth, if any using wire brushing and bio wash solution.
3. Sand the glossy surface using Emery Paper 180, as it results in a roughened surface for good adhesion of the primer to the surface.
New concrete, masonry or plaster: Allow the newly constructed cement surface to cure for minimum of 30 days, prior to application of J&N Acrylic Base Water Thinnable Cement Primer. Ensure that the wall to be painted is completely dry and free from any cement residue.
 

How to apply?

1. Apply one coat of J&N Acrylic Base Water Thinnable Cement Primer at the recommended dilution level, using standard brush or roller application. Let it dry for minimum 4-5 hours and then apply Jensolin White Cement based Wall Putty using Putty Knife. Allow it to dry for 4-6 hrs. Follow this with one more coat of J&N Acrylic Base Water Thinnable Cement Primer.
2. Dilute Jenson & Nicholson Robbialac Super Acrylic Plastic Emulsion as per the recommended ratio and apply the first coat. Let it dry for 4-5 hrs and if required, apply a second coat.

Application precautions

1. Do not apply when the ambient temperature drops to levels below 10° C or rises above 45° C within 4 hours of application.
2. Do not over thin the product above the suggested dilution levels.
3. Do not apply the diluted material after storing for over 24hrs.
4. It is advised not to apply the product on surfaces/substrates with continuous seepage or dampness.
5. Stir the paint properly before use.
6. Seal the container when not in use.

Post Application Care:

Ensure proper washing and cleaning of all dust, Algal and Fungal growth at regular intervals of 5-6 months, for longer durability and better retention of aesthetics.
 

Safety Precautions

1. Keep containers upright, tightly closed in a cool, dry, well ventilated place.
2. Ensure opened containers are tightly closed, when not in use.
3. Store away from excessive heat, direct sunlight and other flammable materials.
4. Flammable product, store in a place away from direct sunlight, heat and sparks.
5. Keep out of reach of children and pets.
6. Do not store near food, drinks or animal feed.
7. Do not mix with incompatible materials.
8. Use personal protective equipment like goggles, face masks and gloves.
9. Ensure good ventilation during application and drying.
10. Do not inhale the vapour or spray.
11. In case of contact with eyes or skin, wash immediately using plenty of water. Seek medical advice, if irritation persists.
12. In case of ingestion, seek immediate medical attention.
13. Do not dispose any spilled or unused paint in drain, water bodies and landfill.
14. Dispose spillages or unused paint and containers, through appropriate disposal agency.
 

Storage and Transportation: 

1. Store the containers at constant temperatures, away from direct sunlight /elevated temperatures.
2. Keep the product in frost-free environment.
3. Store the containers in upright position to avoid leakage or damage.
4. Do not pour the waste paint in drains or other water sources.

Shelf Life:
2 years from the date of manufacture in the original tightly closed containers, stored away from direct sunlight and excessive heat.