
Knifing Paste Filler
An easy-to-use Knifing Paste Filler that you can apply over large cracks, joints and fill up dents easily. There’s no need to mix or dilute the oil modified putty. Recommended filler for pigmented topcoat finishes.
AREA OF USAGE
Knifing Paste Filler is ideal to use on primed metal body and on all types of bare wooden surfaces.

Effective Filling Solution – Get rid of large dents and cracks with Knifing paste filler that can cover up to 2 mm with its highly durable mix.
No Dilution Required – The product is ready to use out of the box and doesn’t need any dilution before applying.
Easy to Apply – Thick paste allows you to easily apply and cut-on the drying time to get a smooth wooden surface.
Packs Available
Shelf life is 12 months and should be stored between 15-30 degree Celsius
Application Method
Putty knife / Spatula
Coverage
**coverage may vary based on the type of wood used and the application methodology
Technical Data
@30 c and 60% RH
Wet Sanding
4 -5 Hours
Dry Sanding
6 – 8 Hours
Flash Point
Above at 35 C
RECOMMENDED USE
For Metal Surface
First, the surface should be cleaned free of rust, dirt, loose material, grease, wax etc. Before using Knifing Paste Filler, apply Sheenlac Red oxide or Zinc chrome Metal primer and allow it to dry well.
For Wooden surface
Prepare the wooden surface by sanding it properly first. Then prime the surface with Sheenlac Wood primer and allow it to dry for 8 hours before beginning to use Knifing Paste Filler.
Always apply Knifing Paste Filler in successive layers and not as one thick layer. Use Sheenlac Enamel thinner for further dilution, if it warrants.
Ancillary Products



Reviews
There are no reviews yet.